Sharp LC 32D62U User Manual LCD TELEVISION Manuals And Guides L0704205

SHARP LCD Television Manual L0704205 SHARP LCD Television Owner's Manual, SHARP LCD Television installation guides

User Manual: Sharp LC-32D62U LC-32D62U SHARP LCD TELEVISION - Manuals and Guides View the owners manual for your SHARP LCD TELEVISION #LC32D62U. Home:Electronics Parts:Sharp Parts:Sharp LCD TELEVISION Manual

Open the PDF directly: View PDF PDF.
Page Count: 59 

SHARR LC-32D62U LC-37D62U LIQUID  CRYSTAL  TC:LEVISEUR  TELEVISION  ACL  TELEVISOR CRISTAL  CON PANTALLA LJQUIDO  OPERATION  MANUAL  MODE  DE  D'EMPLOI  MANUAL  DE OPERACION  AQUOS  HUGH-_INITIO_ T_LEVlSlON  H_lrn| HlaH-D_INITION  _ULTI_EDIA  TM  I_TE_FACE  i  i_i!! !_i_!_i!i!ii!ilili_i!i! IMPORTANT IMPORTANTE  NYCE  : Please read starting : Lea este manual de 0peraci6n comenzar a 0perar el equipo.  antes de  LC-32D62U LC-37D62U LIQUID CRYSTAL  TELEVISION  ENGLISH  OPERATION  MANUAL  • The illustrations and on-screen displays in this operation manual are for explanation purposes and may vary slightly from the actual operations. • Menu items that are not selectable are grayed out. • The examples used throughout this manual are based on the LC-37D62U model.  IMPORTANT: To aid reporting in case of loss or theft, please record the TV's model and serial numbers in the space provided. The numbers are located at the rear of the TV.  IMPORTANT WARNING:  I  Serial No.: odel No.:  INFORMATION  TO OF FIRETO ORRAIN ELECTRIC SHOCK, NOTREDUCE EXPOSE THE THISRISK PRODUCT OR MOISTURE.  DO  The lightning flash with arrow-head symbol, within an equilateral triangle, is intended to alert the user to the RISK OF ELECTRICSHOCK DO NOT OPEN  CAUTION:  TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.  presence of uninsulated "dangerous voltage" within the product's enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. The exclamation point within a triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the product.  Q-I  IMPORTANT CAUTION:  INFORMATION  TO PREVENT ELECTRIC SHOCK, MATCH WIDE BLADE OF PLUG TO WIDE SLOT, FULLY INSERT.  CAUTION: DO NOT PLAC, E THIS PRODUCT ON AN UNSTABLE CART, STAND, TRIPOD, BRAC, KET, OR TABLE. THE PRODUCT MAY FALL CAUSING SERIOUS PERSONAL INJURY AND SERIOUS DAMAGE TO THE PRODUCT. USE ONLY WITH A CART, STAND, TRIPOD, BRACKET, OR TABLE RECOMMENDED BY THE MANUFACTURER OR SOLD WITH THE PRODUCT. FOLLOW THE MANUFACTURER'S INSTRUCTIONS WHEN INSTALLING THE PRODUCT AND USE MOUNTING ACCESSORIES RECOMMENDED BY THE MANUFACTURER. A PRODUCT AND CART COMBINATION SHOULD BE MOVED WITH CARE. QUICK STOPS, EXCESSIVE FORCE, THE PRODUCT AND CART COMBINATION TQ OVERTURN.  AND  UNEVEN  SURFACES  MAY CAUSE  WARNING: FCC Regulations state that any unauthorized changes or modifications to this equipment approved by the manufacturer could void the user's authority to operate this equipment.  not expressly  CAUTION: This product satisfies FCC regulations when shielded cables and connectors are used to connect the unit to other equipment. To prevent electromagnetic interference with electric appliances such as radios and televisions, use shielded cables and connectors for connections.  DECLARATION OF CONFORMITY: SHARP LIQUID CRYSTAL TELEVISION, MODEL LC-32D62U/LC-37D62U This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. RESPONSIBLEPARTY: SHARP ELECTRONICSCORPORATION Sharp Plaza, Mahwah, New Jersey 07430-2135 TEL: 1-800-BE-SHARP For Business Customers: URL http://www.sharpusa.com  INFORMATION: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: -- Reorient or relocate the receiving antenna. -- Increase the separation between the equipment and receiver. -- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. -- Consult the dealer or an experienced radio/TV technician for help. "Note to CATV system installer: This reminder is provided to call the CATV system installer's attention to Article 820-40 of the National Electrical Code that provides guidelines for proper grounding and, in particular, specifies that the cable ground shall be connected to the grounding system of the building, as close to the point of cable entry as practical." This product utilizes tin-lead solder, and fluorescent lamp containing a small amount of mercury. Disposal of these materials may be regulated due to environmental considerations. For disposal or recycling information, please contact your local authorities or the Electronic Industries Alliance: www.eia.org  Trademarks " Laboratories. anufactured  under  ,, Licensing HDMI, the LLC." HDMI  ,, efficiency. roducts  (D-2  license  logo  from  Dolby  and High-Definition  that have earned  the ENERGY  Laboratories.  Multimedia  "Dolby"  Interface  STAR ® are designed  and the double-D  are trademarks  to protect  symbol  are trademarks  or registered  the environment  trademarks  through  superior  of Dolby  of HDMI  energy  DEAR SHARP CUSTOMER Thank you for your purchase of the Sharp Liquid Crystal Television. To ensure safety and many years of trouble-free operation of your product, please read the Important Safety Instructions carefully before using this product.  IMPORTANT  SAFETY INSTRUCTIONS  Electricity is used to perform many useful functions, but it can also cause personal inJuries and property damage if improperly handled. This product has been engineered and manufactured with the highest priority on safety. However, improper use can result in electric shock and/or fire. In order to prevent potential danger, please observe the following instructions when installing, operating and cleaning the product. To ensure your safety and prolong the service life of your Liquid Crystal Television, please read the following precautions carefully before using the product. 1) 2) 3) 4) 5) 6) 7) 8) 9)  10) 11) 12)  13) 14)  Read these instructions. Keep these instructions. Heed all warnings. Follow all instructions. Do not use this apparatus near water. Clean only with dry cloth. Do not block any ventilation openings. Install in accordance with the manufacturer's instructions. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat. Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with one wider than the other. A grounding type plug has two blades and a third grounding prong. The wide blade or the third prong are provided for your safety. If the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet. Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit from the apparatus. Only use attachments/accessories specified by the manufacturer. Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus. When a cart is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over. Unplug this apparatus during lightning storms or when unused for long periods of time. Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.  Additional  Safety  Information  15) Power Sources--This product should be operated only from the type of power source indicated on the marking label. If you are not sure of the type of power supply to your home, consult your product dealer or local power company. For products intended to operate from battery power, or other sources, refer to the operating instructions. 16) Overloading--Do not overload wall outlets, extension cords, or integral convenience receptacles as this can result in a risk of fire or electric shock. 17) Object and Liquid Entry--Never push objects of any kind into this product through openings as they may touch dangerous voltage points or short-out parts that could result in a fire or electric shock. Never spill liquid of any kind on the product. 18) Damage Requiring Service--Unplug this product from the wall outlet and refer servicing to qualified service personnel under the following conditions: a) When the AC cord or plug is damaged, b) if liquid has been spilled, or objects have fallen into the product, c) if the product has been exposed to rain or water, d) If the product does not operate normally by following the operating instructions. Adjust only those controls that are covered by the operating instructions as an improper adjustment of other controls may result in damage and will often require extensive work by a qualified technician to restore the product to its normal operation, e) If the product has been dropped or damaged in any way, and f) When the product exhibits a distinct change in performance - this indicates a need for service. 19) Replacement Parts--When replacement parts are required, be sure the service technician has used replacement parts specified by the manufacturer or have the same characteristics as the original part. Unauthorized substitutions may result in fire, electric shock, or other hazards. 20) Safety Check--Upon completion of any service or repairs to this product, ask the service technician to perform safety checks to determine that the product is in proper operating condition. 21) Wall or ceiling mounting--When mounting the product on a wall or ceiling, be sure to install the product according to the method recommended by the manufacturer.  Q-3  IMPORTANT  SAFETY INSTRUCTIONS  bowl, kitchen sink, or laundry tub; in a wet basement; or near a swimming pool; and the like. o Water and Moisture -- Do not use this product near water - for example, near a bath tub, wash  product on an unstable base can cause the product to fall, resulting in serious personal injuries as well as damage to the product. Use only a cart, stand, tripod, bracket or table recommended by the manufacturer or sold with the product. When mounting the product on a wall, be sure to manufacturer's Useunstable only the cart, mounting by the * follow tand the -- Do not place the instructions. product on an stand, hardware tripod or recommended table. Placing the manufacturer.  * Selecting the location -- Select a place with no direct sunlight and good ventilation.  cover or block these vents and openings since insufficient ventilation can cause overheating and/or shorten the life of the product. Do not place the product on a bed, sofa, rug or other similar surface, since they can block ventilation openings. This product is not designed for builtin installation; do not place the product in an enclosed place such as a bookcase or rack, unless * proper entilatior7 -- The is vents and other in the cabinet are designed for ventilation. Do not ventilation provided or theopenings manufacturer's instructions are followed.  product is dropped or applied with impact. Be careful not to be injured by broken glass pieces in case the panel breaks. o tTeLiquid Crystal panel used in this product is made of glass. Therefore, it can break when the  registers, stoves, or other products (including amplifiers) that produce heat. o  eat -- The product should be situated away from heat sources such as radiators, heat  Occasionally, a few non-active pixels may appear on the screen as a fixed point of blue, green or red. Please note that this l does not affect the performance of your product. | °The Liquid Crystal panel is a very high technology product with 6,220,800 thin film transistors, giving you fine picture details.}  )  Be sure to always carry the TV by two people holding it with two hands -- one hand on  Precautions when transporting each side of the TV.  the TV  when it is left unattended and unused for long periods of time, unplug it from the wall outlet and disconnect the antenna. This will prevent damage to the equipment due to lightning and o power-line ightning --surges. For added protection for this television equipment during a lightning storm, or  power lines or other electric light or power circuits, or where it can fail into such power lines or circuits. When installing an outside antenna system, extreme care should be taken to keep power lines or circuits contactnotwith bevicinity fatal. of overhead ° from owertouching Lines --such An outside antenna systemasshould be them locatedmight in the  Q-4  IMPORTANT  SAFETY INSTRUCTIONS  f  • Outdoor Antenna Grounding -- If an outside antenna is connected to the television equipment, be sure the antenna system is grounded so as to provide some protection against voltage surges and built-up static charges. Article 810 of the National Electrical Code, ANSI/NFPA 70, provides information with regard to proper grounding of the mast and supporting structure, grounding of the leadqn wire to an antenna discharge unit, size of grounding conductors, location of antenna-discharge unit, connection to grounding electrodes, and requirements for the grounding electrode.  EXAMPLE OF ANTENNA GROUNDING AS PER NATIONAL ELECTRICAL (}ODE, ANSI/NFPA 70 ....-_i_--  ANTENNA  INWIRE GROUND  -,_/N  bx_ ANTENNA ]_ I _N_ DISCHARGE UNIT  /_  (NEO SECTION 810-2O)  I ,_"_-_,L  GROUNDING CONDUCTORS  GROUND CLAMPS _ NEC -- NATIONAL ELECTRICAL (}ODE  POWER SERVICE GROUNDING ELECTRODE SYSTEM (NEC ART 250, PART H)  , To prevent fire, never place any type of candle or flames on the top or near the TV set.  No objects filled with liquids, such as vases, should be placed on the product.  ,  o prevent fire or shock hazard, do not expose this product to dripping or splashing.  items.  ,  o prevent fire or shock hazard, do not place the AC cord under the TV set or other heavy  r  • Turn off the main power and unplug the AC cord from the wall outlet before handling. • Use a soft cloth and gently wipe the surface of the display panel. Using a hard cloth may scratch the panel surface. • Use a soft damp cloth to gently wipe the panel when it is really dirty. (it may scratch the panel sur[ace when wiped strongly.) • if the panel is dusty, use an anti-static brush, which is commercially available, to clean it. • To protect the panel, do not use a dirty cloth, liquid cleaners or chemical cloth to clean it, such materials may damage the panel surface. • To clean the outer cabinet, use the same method. Do not use liquid or aerosol cleaners. ,,e  , Do not display a still picture for a long time, as this could cause an afterimage to remain.  ) Q-5  Supplied accessories Make sure the following accessories are provided with the product.  Remote control unit (×1) Page 8  "AAA" size battery (×2) Page 8  AC cord (× 1) Page 7  Cable Clamp (× 1) Oabletie (× 1) Page7  Stand unit (x 1) Page 6  Operation manual (xl)  • Always use the AC cord supplied with the TV.  QUICK REFERENCE  • Before attaching (or detaching) the stand, unplug the AC cord from the AC INPUT terminal. • Before performing work spread cushioning over the base area to lay the TV on. This will prevent it from being damaged.  • Attach the stand in the correct direction. • Be sure to follow  the instructions. Incorrect  installation  Confirm that there are 9 screws (all the same size) supplied with the 77/.  of the stand may result in the TV falling  over.  (_ Insert the stand into the openings on the bottom of the TV. (_ Insert and tighten the 4 screws into the 4 holes on the rear of the TV.  Set the post for the stand unit onto the box. Attach the base to the post. Insert and tighten the 5 screws into the 5 holes on the bottom of the base.  Hex key_  (_) _ _  _Hex  key  _Screw  Soft cushion  1  (_  Screw_  • To detach the stand, perform the steps in reverse order.  Q-6  QUICK  REFERENCE  STOP! To safely remove the AQUOS television  from the box  • It's best to use 2 people to remove the AQUOS television for stability. • Lift onto installation location as the diagram illustrates.  Ventilation  & Cleaning  Tips  Keep your AQUOS television in a well ventilated area and make sure not to place it by a heat source or use near water. The AQUOS television is designed for AC use only and should be used with supplied AC cord. Clean the screen by spraying a soft lint free cloth with water to lightly moisten, Gently wipe and I_ ,_- _ avoid pressing on the screen. To clean the outer cabinet, use the same method. Do not use G................ liquid or aerosol cleaners. The screen is glass and can be scratched or broken when dropped or impacted.  QUICK INSTALLATION  _ _ J' /  TIPS  Attach your antenna to the back of the AQUOS television. (See page 12.)  How to turn on the AQUOS television for the first time, A) Press POWER on AQUOS television.  Connect the AC plug for the AQUOS television into the AC outlet. VOL _-  v  CH  _  INPUT  POWER B) POWER indicator on the front of the AQUOS television lights GREEN,  Jl  0  0  _  o  o  • Place the TV close to the AC outlet, and keep the power plug within reach.  • TO PREVENT RISK OF ELECTRIC SHOCK, DO NOT TOUCH UN-INSULATED PARTS OF ANY CABLES WITH THE AC CORD CONNECTED.  Place the Ferrite core in the space indicated in the below figure and bundle the cords properly with cable clamp and a cable tie,  POWER indicator  • Speakers cannot be detached from the TV. • TV angle cannot be adjusted.  Ferrite core  Q-7  QUICK REFERENCE If the remote control fails to operate TV functions, replace the batteries in the remote control unit, 1 Open the battery  2 Insert two "AAA"  cover.  (supplied  size batteries  3 Close the battery  cover.  with the product).  • Place the batteries with their terminals corresponding to the (+) and ( ) indications in the battery compartment.  Improper use of batteries can result in chemical leakage or explosion. Be sure to follow the instructions below. • Do not mix batteries of different types. Different types of batteries have different characteristics. • Do not mix old and new batteries. Mixing old and new batteries can shorten the life of new batteries or cause chemical leakage in old batteries. • Remove batteries as soon as they are worn out. Chemicals that leak from batteries that come in contact with skin can cause a rash. If you find any chemical leakage, wipe thoroughly with a cloth. • The batteries supplied with this product may have a shorter life expectancy due to storage conditions. • If you will not be using the remote control unit for an extended period of time, remove batteries from it.  IMPORTANT: The POWER television.  indicator  television  should  light GREEN  indicating  you have power to the AQUOS f  If the POWER the remote  on the AQUOS  indicator  control  IMPORTANT: IF THE UNIT DOES THE INSTALLATION  on the AQUOS  to turn the power  NOT POWER STEPS.  television  still does not light up, press "IV POWER  _  on  on.  ON - UNPLUG  THE AQUOS  TELEVISION  FROM THE OUTLET  AND  REPEAT  IF YOU STILL ENCOUNTER NO POWER, PLEASE CONTACT US AT 1-800-BE-SHARP. Please refer to the BASIC ADJUSTMENT SETI-INGS SECTION for EZ Setup and basic channel setup functions and USING EXTERNAL EQUIPMENT SECTION for other device connections (DVD, VCR, AUDIO, etc.) in your AQUOS operation manual. Q-8  Contents IMPORTANT INFORMATION ................................. 1 Trademarks ............................................................. 2 DEAR SHARP CUSTOMER .................................... 3 IMPORTANT SAFETY INSTRUCTIONS ................. 3 Supplied accessories ............................................. 6 QUICK REFERENCE ............................................... 6 Attaching the stand ............................................. 6 Contents .................................................................. 9 Part names ............................................................. 10 TV (Front) ........................................................... 10 TV (Rear)............................................................ 10 Remote control unit ........................................... 11 Preparation ............................................................ 12 Using the remote control unit ............................. 12 Cautions regarding the remote control unit._.12 Antennas ........................................................... 12 Connecting a Blu-ray disc player, HD-DVD player, DVD player or a Digital TV STB (Air or Cable),..13 Connecting a VCR, game console or camcorder ................................................... 14 Using Digital Audio Output ................................. 14 Connecting HDMI equipment ............................. 14 Connecting a PC ............................................... 15 PC compatibility chart ........................................ 15 Watching _ ........................................................... 16 Turning on the power ......................................... 16 Turning off the power ......................................... 16 Initial setup ........................................................ 17 Simple button operations for changing channels ......................................... 18 Simple button operations for changing volume/sound ................................. 19 Setting MTS/SAP stereo mode .......................... 20 Setting Digital broadcasting audio mode ............ 20 Basic adjustment settings ................................... 21 Menu operation buttons .................................... 21 On-Screen Display ............................................ 21 Menu items for TV/INPUT 1/2/3 ........................ 22 Menu items for HDMI ........................................ 22 EZ Setup .......................................................... 23 Channel Setup .................................................. 23 Antenna Setup-DIGITAL ................................... 24 Favorite channel setting .................................... 25 Picture adjustments .......................................... 26 OPC setting ................................................. 26 Advanced picture adjustments ..................... 27 Color Temperature ....................................... 27 Black ............................................................ 27 3D-Y/C ........................................................ 27 Monochrome ............................................... 27 Film Mode (3:2 pull-down) ............................ 27 Range of OPC .............................................. 27 Sound adjustment ............................................ 28 Surround .......................................................... 28 Power Control .................................................. 29 Digital Setup ..................................................... 29 Audio Setup ................................................. 29  Using external equipment .................................... Displaying an external equipment image ........... Input Select ...................................................... Displaying an image from HDMI equipment ....... Input Skip ......................................................... Useful adjustment settings .................................. Language setting .............................................. Image position .................................................. Reset ................................................................ Input Label ........................................................ Sleep Timer ...................................................... View Mode for 4:3 Programs ............................ View Mode for HD Programs ............................ View Mode (for PC input mode) ........................ Advanced Option settings ................................. Audio Only ................................................... Digital Noise Reduction ................................ Output Select ............................................... Color System ............................................... Program Title Display ................................... AV MODE ......................................................... Input Signal (for PC input mode) ....................... Closed Captions and Digital Closed Captions.., Caption Setup .................................................. Secret number setting for parental control ........ Parental control (setting V-CHIP level) ............... How to temporarily release the V-CHIP BLOCK ........................................ Reactivating the temporarily released V-CHIP BLOCK .............................................. Other viewing options .......................................... Freezing images ................................................ Presetting remote control function .................... Appendix ............................................................... Removing the stand .......................................... Setting the TV on the wall ................................. Troubleshooting ................................................ Troubleshooting-Digital broadcasting ................ Specifications .................................................. Optional accessory ............................................ Calling for Service ................................................ LIMITED WARRANTY ...........................................  30 30 30 31 31 82 32 32 32 33 33 34 34 35 36 36 36 36 36 36 37 37 38 39 40 42 45 45 46 46 46 50 50 50 51 51 52 52 54 54  Dimensional drawings • The dimensional drawings for the LCD TV set are shown on the inside back cover.  Q-9  Part names  Remote control sensor _ /  _  OPC sensor*  POWER  _ _  SLEEP  _  ORC  _  7  OPC indicator*  _ _ SLEEP indicator** ........................................................................ POWER indicator**  /  *OPC: Optical Picture Control (See page 26.) **See page 16 for TV status indicator.  I  INPUT button  Channel buttons 7 (cHV/A)  __  HDMI terminal (INPUT 4)  HDMI terminal (INPUT 5)  Volume buttons  _OL-J÷/__l vok +  __  ,.z CH _  CI  INPUT  POWER  button  eOWER  DIGITAL AUDIO OUTPUT terminal  I  I --AUDIO  I  I[  *  ii  --  terminals (INPUT 5)  Antenna/Cable  in  I IF-_ INPUT 3 terminals  INPUT 2 terminals  AC INPUT terminal  INPUT 1 terminals  Q-  10  Part names 1  I  14  "IV POWER: Switch the TV power on or enters standby. (See page 16.)  2  DISPLAY:  3  SOURCE POWER: Turns tile power of the external equipment on and off.  4  External equipment operational the external equipment.  5  0 - 9: Set the channel. (See page 18.)  6  • (DOT}: (See pages 18 and 48.)  7  INPUT: Select a TV input source. (TV, iNPUT 1, INPUT 2, INPUT 3, INPUT 4, iNPUT 5) (See page 30.)  8  VOL +/-:  9  SURROUND: 19.)  10  FREEZE: Set the sti{I image. Press again to return to normal screen. (See page 46.)  11  EXIT: Turn off the menu screen.  12 SLEEP:  Display tile channe{ information.  buttons:  Operate  Set the volume. (See page 19.) Select Surround  settings. (See page  Set the sleep timer. (See page 33.)  13 AUDIO: Se{ects the MTS/SAP or the audio mode during multi-channel audio broadcasts. (See page 20.) 14  9  • To enter the code registration mode, you need to press FUNCTION and DISPLAY at the same time. 15  22 11  FUNCTION: Switches the remote control for TV, CBL/SAT, VCR, DVD and AUDIO operation. Indicator lights up for the current mode. (See pages 46 to 49 for details.)  _oO  23  LIGHT ,O?:When pressed all buttons on the remote control unit will light. The lighting will turn off if no operations are performed within about 5 seconds. This button is used for pedorming operations in Iow{ight situations.  16 VIEW MODE: and 35.) 17  ENT: Jumps to a channel after selecting with the 0-9 buttons.  18  FLASHBACK: Return to the previous external input mode. (See page 18.)  19 CHA/V:  12 27  Select the screen size. (See pages 34  Select the channel.  channel or  (See page 18.)  20  MUTE:  Mute the sound. (See page 19.)  21  MENU:  Display the menu screen.  22  A/T/_/I_/ENTER: screen.  23  RETURN:  24  FAVORITE  Select a desired  item on the  Return to the previous menu screen. OH  A, B, C, D: Select 4 preset favorite channels in 4 different categories. (See page 25 for details.) While watching, you can toggle the selected by pressing A, B, C and D. 25  FAVORITE:  Set the favorite  26 CO: Display captions (See page 38.)  channels.  channels  (See page 25.)  from a closed-caption  source.  27 AV MODE: Select an audio or video setting. (When the input source is TV, INPUT 1,2 or 3: STANDARD, MOVIE, GAME, USER, DYNAMIC (Fixed), DYNAMIC. When the input source is INPUT 4 or 5: STANDARD, MOVIE, GAME, PC, USER, DYNAMIC (Fixed), DYNAMIC.) (See page 37.) • When using the remote control unit, point it at the TV.  Q-11  Preparation  Use the remote control unit by pointing it towards the remote control sensor on the TV. Objects between the remote control unit and the remote control sensor may prevent proper operation.  • Do not expose the remote control unit to liquids, and • Do not install or place the deformation of the remote  control do not remote control  unit to shock, in addition, do not expose the remote place in an area with high humidity. control unit under direct sunlight. The heat may cause unit.  • The remote control unit may not work properly if the remote control sensor on the TV is under direct sunlight or strong lighting, in such cases, change the angle of the lighting or the %/, or operate the remote control unit closer to the remote control sensor.  /  To enjoy a clearer picture, use an outdoor antenna. The following is a brief explanation of the types of connections that are used for a coaxial cable. If your outdoor antenna uses a 75-ohm coaxial cable with an F-type connector, plug it into the antenna terminal at the rear of the TV set, "1. A 75+ohmsystem is generallya round cable with Fqype "_ connector that can easilybe attached to a terminal without tools (Commemiallyavailable). F-type connector 75+ohm coaxial cable (round)  _  -type connector should be finger -_ tightened only.  When connecting the RF cable to the TV set, do not tighten F-type connector with tools. If tools are used, it may cause damage to your TV set, (The breaking of internal circuit, etc.)  2. A 300+ohm system is a flat "twinqead" cable that can be attached to a 75+ohm terminal through a 300/75+ohm adapter (Commemially available).  F4ype connector  75+ohm coaxial cable  300+ohm twimlead cable (flat) _.,  J  r  Connecting  Antenna  Cable  Home terminal  Antenna (75  ohm)  [2 _  Cable without a CA'IV converter  =  Ce_;al cable (commeroial_y  available)  VHF/UHF antenna • Connect Home terminal  (75  ohm)  Ce_;al cable (commeroial_y  available)  Combination VHF/ UHF antenna _  ohrr7 coaxial  cable  (round)  _[]_  300/75-ohm  VHF  UHF  ANTENNA  ANTENNA  adapter  (commercially available)  Separate VHF/UHF antenna  To TV antenna terminal  Q-  12  the antenna cable  to the TV using one of the methods in the illustration as shown (_, _, _ or _).  AntelTna  _1  Preparation You can connect many types of external equipment to your TV like a Blu-ray disc player, HD-DVD player, DVD player, VCR, Digital TV tuner, HDMI equipment, game console or camcorder. To view external source images, select the input source from INPUT on the remote control unit or on the TV. (See pages 30 and 31 .)  • To protect equipment, always turn off the TV before connecting any external equipment. • Please read the relevant operation manual (Blu-ray disc player, etc.) carefully before making connections.  You can use the INPUT 1, INPUT 2 or INPUT 3 terminals when connecting to a Blu-ray disc player, HD-DVD player, DVD player, a Digital TV STB (Air or Cable) and other audiovisual equipment. When using composite cable. (INPUT 1 or 2) Example  AV cable (commercially available)  Blu-ray disc player/HD-DVD player/ DVD player/Digital TV STB When using component  cable. (INPUT 1 or 3) Example  Component video cable (commercially available)  Blu-ray disc player/HD-DVD DVD player/Digital TV STB  player/  • To enjoy the AQUOS 1080p display capability, connect your external equipment using a component cable and set the equipment to 1080p output. • See page 14 for connecting a DVD player or a Digital TV STB to the HDMI terminal.  Q-  13  Preparation  A VCR, game console, camcorder and other audiovisual equipment can be conveniently connected using the INPUT 1 or 2 terminals. When using S-VIDEO cable. (INPUT 2)  SWIDEO cable (commercially available)  Audio cable (commercially available)  VCR/Game console/Camcorder When using composite cable. (INPUT1 or 2) Example  AV cable y available)  VCR/Game  console/Camcorder  • The SWIDEO terminal takes priority over the video terminals. (INPUT 2 only)  It is possible to output audio through the DIGITAL AUDIO OUTPUT terminal. (See page 29 for details.) PCM audio outputs from the terminal.  Optical fiber cable (commercially available)  External audio devices  You can use the INPUT 4 or INPUT 5 terminal  when  connecting  HDMI cable  HDMI equipment, Example  (commercially available)  HDMI equipment  • When using an HDMI DVI conversion cable, input the audio signal to AUDIO terminal of INPUT 5. • To enjoy the AQUOS 1080p display capability, connect your Blu ray disc player, HD-DVD player or other external equipment using an HDM[ cable and set the equipment to 1080p output.  Q-  14  Preparation  When  connecting  to a PC with  an HDMI  terminal.  (INPUT  HDMI cable  4 or 5) Example  (commercially available)  PC  • The HDMI terminals only support digital signal.  It is necessary  to set the PC correctly  PC  Resolution 720 x 400 VGA  PC  SVGA  XGA  I  640 x 480  800 x 600  1024 x 768  to display  XGA and WXGA signal. Refer to page 37 to set PC input signals.  Horizontal Frequency 31.5 kHz  Vertical Frequency 70 Hz  VESA Standard  31.5 kHz 37.9 kHz  60 Hz 72 Hz  0 0  37.5 kHz  75 Hz  0  35.1 kHz  56 Hz  0  37.9 kHz  60 Hz  0  48.1 kHz  72 Hz  0  46.9 kHz 48.4 kHz  75 Hz 60 Hz  0 0  56.5 kHz  70 Hz  0  60.0 kHz  75 Hz  0  WXGA  1360 x 768  47.7 kHz  60 Hz  0  SXGA  1280 x1024  64.0 kHz  60 Hz  0  Power Management is a registered trademark of Sun Microsystems, Inc. DC and is a registered trademark trademarks of Video Electronics Standards Association. VGA XGA are registered of international Business Machines Co., inc.  (D-15  Watching TV Simple operations for watching a TV program  f  Press POWER on the TV, or "IV POWER on the remote control unit, • POWERindicator (Green):The TV is on. (Aftera few seconds, a window appears with sound.)  POWER  • The initial setup starts when the TV powers on for the first time. if the TV has been turned on before, the EZ Setup will not be invoked. See page 23 for performing EZ Setup from the Setup menu.  O Press POWER remote control  on the TV, or TV POWER unit,  on the  • The TV enters standby and the image on the screen disappears. • The POWER indicator on the TV turns off. POWER indicator SLEEP indicator  indicator  • If you are not going to use this TV for a long period of time, be sure to remove the AC cord from the AC outlet. • Weak electric power is still consumed even when POWER is turned off.  TV POWER (On/Standby)  2;SATo V! o SOURCE  LIGHT  6E) GD EE) C_ (3D C_ 6E) (_E} @ REC  TV status  Os_tNa ndby  indicator  (POWER)  Lightingoff(Green) Lights  TV status  t  indicator  (OPC)  I "On" "Off" or isselected in OPC setting in OPC setting "On: Display" is selected  Lights off(Green) Lighting  • See page 26 for details.  TV status  indicator  (SLEEP)  I "30", "Off" is selected in "120" SLEEPissetting "60", "90" or selected in SLEEP setting • See page 33 for details.  Q-  16  Lights off(Red) Lighting  t  Watching TV  When you turn on the TV for the first time, it will automatically memorize the broadcasting channels where you live. Perform the following steps before you press "IV POWER on the remote control unit, 1= Insert the batteries into the remote control unit, (See page 8.) 2. Connect the antenna cable to the TV. (See page 12.) 3. Plug in the AC cord to the AC outlet, (See page 7.) Channel search Channel auto search makes the TV look for all channels viewable in the set area. When "Air" is selected in Antenna setting: Press 4/I_ ENTER.  to select "Start", and then press  Language setting Select from among 3 languages: English, French and Spanish.  OH Search  Press &/T to select the desired language listed on the screen, and then press ENTER. Language  When "Cable" setting:  is selected in Antenna  Press A/T to select "Analog & Digital Search Start" to search both analog and digital broadcasts or "Analog Search Start" to search only analog broadcasts, and then press ENTER. Antenna setting Make sure what kind of connection is made with your TV when selecting "Air" or "Cable".  OH Search  Press _1/I_ to select "Air" or "Cable". Press ENTER to enter the setting, Example • The Channel search will start automatically. • To exit the Channel search screen, select "Cancel", and then press ENTER. Example  Air  [ 25]  Found  [ 20]  J  1!  • If no channel is found, confirm the type of connection made with your TV and try EZ Setup again. (See page 23 .)  (D-  17  Watching TV Method 1 Using OH A/V TV. You can change channels in several ways.  on the remote control unit or on the  Method 2 Press FLASHBACK to switch to the previously tuned channel.  VOL +  "  v  CH ,_  r--q  IP4PUT  POWER  O  c:3  "_  Press FLASHBACK again to switch back to the currently tuned channel.  • FLASHBACK will not work if no channel has been changed after the TV is turned on. TV  TV  VCR  CBL/SAT  DVD  o  0  AUDIO  FUNCTION  o  0 SOURCE  O0 LIGHT  (_E) OE) GE) (3E) (3D CE) (_ EB @ REC  Method  3  Using remote control buttons 0-9, • (DOT) to select channels for VHF/UHF/CATV/DIGITAL To select a 1 or 2-digit channel number (e. g., Channel 5): Press 5_ENT  • When selecting a 1-digit channel number, it is not necessary to press 0 before the number. • When you enter 0-9 only, channel selection will be made if there is no operation within a few seconds. INPUT  FLASHBACK  ©@ VOL  CH  FREEZE  Press I_I_5_ENT  MENU  o_o  C®9 --  To select a 3-digit channel number (e. g., Channel 115):  To select a 4-digit channel number (e. g., Channel 22.1): Press 2 _2_  • (DOT) _I_ENT  FAVORITE CH --  ®®@®  AQUOS  (D-  18  • When you enter 0-9 only, channel selection will be made if there is no operation within a few seconds. • If you push "0" by itself, nothing will happen. • Complete the above steps within a few seconds. • When you enter 0-9 and • (DOT), channel selection will be made if there is no operation within a few seconds.  Watching TV • Using MUTE on the remote control unit Mutes the current sound output. • Changing the volume You can change the volume on the TV or on the remote control unit,  ,%N Press  VOL  +  _  OH  A  VOL  INPUT  power  CH  MUTE,  • E_ will be displayed on the screen for 80 minutes, and the sound is silenced.  il  ! Mute  • Using VOL+/• To increase the volume, press VOL+. • To decrease the volume, press VOL-.  j  • Within 30 minutes of pressing MUTE, mute can be canceled by using one of the methods below. -- Mute will cancel if you press VOL-/+ or MUTE. • Mute will be canceled after 80 minutes have passed. However, the TV will not suddenly output a loud sound as the volume level is set to 0 automatically.  Volume adjustment  • Using  • VOL-/+ on the TV operates the same as VOL +/the remote control unit.  SURROUND  on the  remote  control  unit  on SUR_N  Audio status  SURROUND produces Surround effect from the speakers, Each time you press SURROUND, the mode changes between On and Off. Speaker  Variable sound  Mute  When "Output Select" is set to "Variable", the indicator on the screen changes as shown below.  Surround sound options On: Makes it possible surround sound. Off: Outputs  • See page 86 for details on the Output Select function.  to enjoy natural,  the normal  realistic  sound.  • You can have the same settings by choosing "Surround" on the menu items. (See page 28.)  (D-  19  Watching TV  The TV has a feature that allows reception of sound other than the main audio for the program, This feature is called Multi-channel Television Sound (MTS). The TV with MTS can receive mono sound, stereo sound and Secondary Audio Programs (SAP). The SAP feature allows a TV station to broadcast other information, which could be audio in another language or something completely different like weather information. You can enjoy Hi-Fi stereo sound broadcasts where available.  The types of audio transmitted in a digital broadcast include SURROUND as well as MONO and STEREO. In addition, it is possible for multiple audio tracks to accompany a single video track, Press AUDIO to toggle between audio modes.  or SAP  • Stereo broadcasts View programs like live sporting events, shows and concerts in dynamic stereo sound. • SAP broadcasts Receive TV broadcasts in either MAiN or SAP sound. MAiN sound: The normal program soundtrack (either in mono or stereo). SAP sound: Listen to a second language, supplementary commentary or other information. (SAP is mono sound.)  Example: when receiving Digital broadcasting  If stereo sound is difficult to hear. • Obtain a clearer sound by manually switching to fixed mono-sound mode.  • MTS only operates while in %/mode.  I'1 FAV0 You can ch MTS aslge T//I C_ SLEEP AUDIO AVMOUE CC O _ _ _  shown below to match the televisionbroadcast signal. PressAUDIO to toggle betweenaudio modes.  Examples:when receiving MTS and SAP  Q-  20  STEREO mode  MAIN + SAP mode  STEREO + SAP mode  MONO mode  Basic adjustment settings  Use the following buttons on the remote control to operate the menu,  ;7  Example  VoO_ A0#_o 0  GB_2SAT  _D  FUNOTIO_  SOURCE  LIGHT  dE) OD CE) _  GE) CE)  REC  OO(Z) dbOO QOO Q@@  Item displayed in yellow • This indicates the item currently selected. • Press ENTER to go to the adjustment screen for this item. INPUT  FLASNBAC_  OO VOL  Item in brackets • This indicates the current setting for the item.  OH  Item displayed in white • This indicates an item can be selected. FREEZE  MENU  0  --  O  FAVORITE  OH  ®®@@  --  AQUOS  MENU:  Press to open or close the menu screen.  A/T/_I/I_:  Press to select a desired item on the screen or adjust a selected item.  ENTER:  Press to go to the next step or complete the setting,  RETURN:  Press to return to the previous step.  Item displayed in gray • This indicates that the item cannot be selected. There are various reasons why items cannot be selected, but the main reasons are as follows: -- Nothing is connected to the selected input terminal. --The function is not compatible with the current input signal.  • Menu options differ in the selected input modes, but the operating procedures are the same. • The screens in the operation manual are for explanation purposes (some are enlarged, others cropped) and may vary slightly from the actual screens.  Ue amr ctbeovanilsoa117_hPee ruSt irO iw_ _11 g?idg feTrn  rdance with each menu setting screen. Q-  21  Basic adjustment settings  [  [ _ p_oture I OPC .............................................................................. Backlight ..................................................................... Contrast ...................................................................... Brightness .................................................................. Color ........................................................................... Tint .............................................................................. Sharpness .................................................................. Advanced Color Temp ..................................................... Black ............................................................... 3D-Y/C ............................................................ Monochrome ................................................... Film Mode ....................................................... Range of OPC ................................................. Reset ...........................................................................  Page Page Page Page Page Page Page  26 26 26 26 26 26 26  Page Page Page Page Page Page Page  27 27 27 27 27 27 26  I_ ,uo,oI Treble .......................................................................... Bass ............................................................................. Balance ........................................................................ Surround ...................................................................... Reset ............................................................................  28 28 28 28 28  I_ P0werC0,tro, I No Signal Off ............................................................... No Operation Off ........................................................  Page 29 Page 29  I_ °pt'°nI  Q-  22  DigitamSetup  26 26 26 26 26 26 26  Page Page Page Page Page Page  27 27 27 27 27 26  ______________________________________________________________________________________________________________ ....  Audio  Treble .......................................................................... Bass ............................................................................. Balance ........................................................................ Surround ...................................................................... Reset ............................................................................  Page Page Page Page Page  28 28 28 28 28  No Signal Off ............................................................... No Operation Off ........................................................  Page 29 Page 29  [_ sotop  EZ Setup ...................................................................... Page 23 CH Setup ..................................................................... Page 23 Antenna Setup-DIGITAL ............................................. Page 24 Input Skip .................................................................... Page 31 Input Label ................................................................. Page 33 Parental CTRL ...................................................... Pages 40-45 Position ........................................................................ Page 32 Language ..................................................................... Page 32 Reset ............................................................................ Page 32  =u =U_  Page Page Page Page Page Page Page  [_ p0w0_c00t_0, ]  I_ SetupI  Audio Only ................................................................... Digital Noise Reduction ............................................. Input Select ................................................................. Output Select .............................................................. Color System .............................................................. Caption Setup ............................................................. Program Title Display ................................................ Favorite CH .................................................................  OPC .............................................................................. Backlight ..................................................................... Contrast ...................................................................... Brightness .................................................................. Color ........................................................................... Tint .............................................................................. Sharpness .................................................................. Advanced Color Temp ..................................................... Black ............................................................... Monochrome ................................................... Film Mode ....................................................... Range of OPC ................................................. Reset ...........................................................................  [_  Page Page Page Page Page  ,oture ]!  Input Skip .................................................................... Input Signal ................................................................. Input Label ................................................................. Position ........................................................................ Language ..................................................................... Reset ............................................................................  Page Page Page Page Page Page  31 37 33 32 32 32  Page Page Page Page  36 36 31 36  [_ Opt,on ] Page Page Page Page Page Page Page Page  36 36 30 36 36 39 36 25  Audio Only ................................................................... Digital Noise Reduction ............................................. HDMI Setup ................................................................. Output Select ..............................................................  • Some menu items may not be displayed depending on the selected input source.  Basic adjustment settings  You can run EZ Setup again, even after setting up the preset channels. Language setting Select from among 3 languages: English, French and Spanish. Press MENU to display the MENU screen, and then press 4  >4  >4  TV-14 (Parents strongly cautioned)  x  >4  >4  >4  TV-MA (Mature audience only)  x  x  >4  _: The content rating can be set, but this rating is not normally broadcast by TV stations. × : Content rating can be set.  Q-  42  Useful adjustment settings Voluntary movie rating system  (MPAA)  TV Parental Guidelines (TV Guidelines)  Press MENU to display the MENU screen, and then press us chapter. 3  SOURCE  POWER  Turns the power of the DVD player on and off.  INPUTn _S_C_  @0  vow'  Each time you  4 |l  c_  Sets pauses and still pictures.  _R_ZE  M_U  Hold down to go in reverse.  --7  6 [] Playback stops when pressed.  __  0 "_ _AVORITEC_  ®®@®  With some DVD players, pressing the button twice may open the disc tray.  0 7  MENU When this button is pressed,  AQUOS  8  ENTER,  the DVD menu will display.  _/_/_/_  ENTER: Press to activate the selected function. A/T/_I/_:  Press the button to select items on the DVD MENU screen.  Hold down to fast forward.  10_ Starts playback.  Q-  49  Appendix  Before detaching (or attaching) stand, unplug the AC cord from the AC INPUT terminal.  ® Do not remove the stand from  the TV unless using an optional  Before attaching/detaching  wall mount  bracket  to mount it.  stand  , Before performing work make sure to turn off the TV. , Before performing work spread cushioning over the base area to lay the TV on. This will prevent it from being damaged.  r1  2 Hex key -_F_  lil  _  -q  i Unfasten place.  the four screws  used to secure the stand  in  Detach the stand from the TV. (Hold the stand so it will not drop from the edge of the base area.)  ,, To attach the stand, perform the above steps in reverse order.  • This TV should be mounted on the wall only with the AN-37AG2 (SHARP) wall mount bracket. The use of other wall mount brackets may result in an unstable installation and may cause serious injuries. ® Installing the TV requires special skill that should only be performed by qualified service personnel. Customers should net attempt to do the work themselves. SHARP bears no responsibility for improper mounting or mounting that results in accident or injury.  Using an optional  bracket  to mount the TV  • You can ask a qualified service professional about using an optional AN-37AG2 bracket to mount the TV to the wall. • Carefully read the instructions that come with the bracket before beginning work. f  Hanging AN-37AG2  on the wall wall mount  (See the bracket  About  setting  the TV angle  f-  bracket.  instructions  for details,)  LC_32D62U 0/5/10 ° ................................................... LC-37D62U  Vertical mounting  0/5/10 °  Angular mounting J  • Detach the cable clamps on the rear o1 the TV wlqen using the optional mount bracket. Due to the terminal configuration on this TV, when you wall-mount this model, make sure there is enough space between the wall and the TV for the cables.  Q-  50  Appendix  Problem  Possible Solution  • No power  • Check if you pressed "IV POWER on the remote control unit. (See page 16.) If the indicator on the TV does not light up, press POWER on the TV. • Is the AC cord disconnected? (See page 7.) • Has the power been turned on? (See page 16.)  • Unit cannot be operated.  • External influences such as lightning, static electricity, may cause improper operation. In this case, operate the unit after first turning on the power of the TV or unplugging the AC cord and replugging it in after 1 or 2 minutes.  • Remote control unit does not operate.  • • • • •  • Picture is cut off/with sidebar screen.  • Is the image position correct? (See page 32.) • Are screen mode adjustments such as picture size made correctly? (See pages 34 and 35.)  • Strange color, light color, or color misalignment  • Adjust the picture tone. (See pages 26 and 27.) • Is the room too bright? The picture may look dark in a room that is too bright. • Check the input signal setting. (See page 37.)  • Power is suddenly turned off.  • is the sleep timer set? (See page 33.) • Check the power control settings. (See page 29.) • The unit's internal temperature has increased. Remove any objects blocking vent or clean.  • No picture  • • • • • •  • No sound  • is the volume too low? (See page 19.) • Is "Variable" selected in "Output Select"? (See page 36.) • Have you pressed MUTE on the remote control unit? (See page 19.)  is the FUNCTION set correctly? Set it to the TV setting position. Are batteries inserted with polarity (+, ) aligned? (See page 8.) Are batteries worn out? (Replace with new batteries.) Are you using it under strong or fluorescent lighting? Is a fluorescent light illuminated near the remote control sensor?  is is is is Is Is  connection to other components correct? (See pages 13 to 15.) correct input signal source selected after connection? (See page 30.) the correct input selected? (See page 30.) picture adjustment correct? (See pages 26 and 27.) "On" selected in "Audio Only"? (See page 36.) a non-compatible signal being input? (See page 15.)  The error message about reception of broadcast The example of an error message displayed on a screen  Error code  Possible  Solution  • Failed to receive broadcast.  E202  • Check the antenna cable. Check that the antenna is correctly setup.  • No broadcast now.  E203  • Check the broadcast time in the program guide.  Cautions  regarding  use in high and low temperature  environments  • When the unit is used in a low temperature space (e.g. room, office), the picture may leave trails orappear slightly delayed. This is not a malfunction, and the unit will recover when the temperature returns to normal. • Do not leave the unit in a hot or cold location. Also, do not leave the unit in a location exposed to direct sunlight or near a heater, as this may cause the cabinet to deform and the Liquid Crystal panel to malfunction. Storage temperature: 4°Fto +140°F( 20'Cto +60°C)  Q-  51  Appendix  item  Model: LC-32D62U  LCD panel  32" Advanced Super View & BLACK TFT LCD  Number of dots TV Function  Model: LC-37D62U 37" Advanced Super View & BLACK TFT LCD  6,220,800 dots (1920 x 1080 x 3 dots)  TV-standard  (CCIR)  American TV Standard ATSC/NTSC System  Receiving Channel  VHF/UHF  VHF 2-13ch, UHF 14-69ch  CAW  1-135ch (non-scrambled  channel only)  Digital Terrestrial 2-69ch Broadcast {SVSB) Digitalcable'_ (64/256QAM) Audio multiplex  1 135ch (non scrambled channel only) BTSC System  Backlight  60,000 hours (at Backlight Standard position)  Audio out  10W x 2  Terminals  Rear  INPUT 1  AV in, COMPONENT in (Recommend to connect game console)  INPUT 2  S VIDEO in, AV in  INPUT 3  Audio in, COMPONENT in  INPUT 4  HDMI in with HDCP  INPUT 5  Audio in, HDMI in with HDCP  DIGITALAUDI00UTPUTOptical Digital audio output  x 1 (PCM/Dolby Digital)  OUTPUT  Audio out  ANTENNA  75 £_Unbalance, F Type )< 1 for Analog (VHF/UHF/CATV) and Digital (AIR/CABLE)  OSD language  English/French/Spanish  Power Requirement  AC 120 V, 60 Hz  Power Consumption  160 W (0.9 W Standby with AC 120V)  198 W (0.9 W Standby with AC 120V)  TV + stand  44.1 Ibs./20.0 kg  52.9 Ibs./24.0 kg  TV only  36.4 Ibs./16.5 kg  44.1 Ibs./20.0 kg  Dimension*2  TV + stand  312_'/64x 239/s2 x 10s/4 inch  36s/16 x 25s/4 x 111/2inch  W x H x D)  TVonly  3125/64x 2059/64 x 35s/64inch  36s/16 x 235/s x 35s/64inch  Weight  Operating temperature  + 32°F to + 104°F (0'C to + 40°C)  Emergency alert messages via Cable are unreceivable. The dimensional drawings are shown on the inside back cover. • As part of policy of continuous improvement, SHARP reserves the right to make design and specification changes for product improvement without prior notice. The pertormance specification figures indicated are nominal values of production units. There may be some deviations from these values in individual units.  The listed optional accessory is available for the Liquid Crystal Television. Please purchase it at your nearest shop. • Additional optional accessories may be available in the near future. When purchasing, please read the newest catalogue for compatibility and check the availability.  Q-  52  Wall mount bracket  AN-37AG2  CLEARING THE  SECRET NUMBER  If you forget the secret number, clear the secret number using the following procedure.  :!  Press MENU to display the MENU screen, and then press ,4/11.-to select "Setup".  Press A/I' to select "EZ Setup", "CH Setup", "Parental CTRL" or "Reset", and the Secret number input screen displays.  I Secret  No,  [°i "'-''_7_="  Press and hold both CHA screen.  rot  +  ]  and VOL+  INPUT  on the TV simultaneously until the message appears on the  POWER  T"e'ecretnumberi'llll I• As a precautionary measure, make a note of your secret number above, cut it from this manual, and keep it in a safe place.  Q-  53  Calling for Service For location of the nearest Sharp Authorized Service, or to obtain product literature, accessories, supplies, or customer assistance, please call 1-800-BE-SHARP.  LIM ITED WARRANTY CONSUMER  LIMITED  WARRANTY  SHARP ELECTRONICS CORPORATION warrants to the first consumer purchaser that this Sharp brand product (the "Product"), when shipped in its original container, will be free from defective workmanship and materials, and agrees that it will, at its option, either repair the defect or replace the defective Product or part thereof with a new or remanufactured equivalent at no charge to the purchaser for parts or labor for the period(s) set forth below. This warranty does not apply to any appearance items of the Product nor to the additional excluded item(s) set forth below nor to any Product the exterior of which has been damaged or defaced, which has been subjected to improper voltage or other misuse, abnormal service or handling, or which has been altered or modified in design or construction. In order to enforce the rights under this limited warranty, the purchaser should follow the steps set forth below and provide proof of purchase to the servicer. The limited warranty described herein is in addition to whatever implied warranties may be granted to purchasers by law. ALL IMPLIED WARRANTIES INCLUDING THE WARRANTIES OF MERCHANTABILITY AND FITNESS FOR USE ARE LIMITED TO THE PERIOD(S) FROM THE DATE OF PURCHASE SET FORTH BELOW. Some states do not allow limitations on how long an implied warranty lasts, so the above limitation may not apply to you. Neither the sales personnel of the seller nor any other person is authorized to make any warranties other than those described herein, or to extend the duration of any warranties beyond the time period described herein on behalf of Sharp. The warranties described herein shall be the sole and exclusive warranties granted by Sharp and shall be the sole and exclusive remedy available to the purchaser. Correction of defects, in the manner and for the period of time described herein, shall constitute complete fulfillment of all liabilities and responsibilities of Sharp to the purchaser with respect to the Product, and shall constitute full satisfaction of all claims, whether based on contract, negligence, strict liability or otherwise. In no event shall Sharp be liable, or in any way responsible, for any damages or defects in the Product which were caused by repairs or attempted repairs performed by anyone other than an authorized servicer. Nor shall Sharp be liable or in any way responsible for any incidental or consequential economic or property damage. Some states do not allow the exclusion of incidental or consequential damages, so the above exclusion may not apply to you. THIS WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS. YOU MAY ALSO HAVE OTHER RIGHTS WHICH VARY FROM STATE TO STATE. Model Specific  Section  Your Product Model Number  Warranty  LC-32D62U/LC-37D62U LCD Color Television (Be sure to have this information available when you need service for your Product.)  & Description:  Period for this Product:  One (1) year parts and labor from the date of purchase.  Additional Item(s} Excluded from Warranty Coverage (if anyL:  Non-rechargeable  batteries.  Where to Obtain Service:  From a Sharp Authorized Servicer located in the United States. To find the location of the nearest Sharp Authorized Servicer, call Sharp toll free at 1-800-BE-SHARR  What to do to Obtain  Contact your Sharp Authorized Servicer to obtain in-home service for this Product. The Servicer will come to your home and if it is necessary to remove the Product, the Servicer will reinstall it. Be sure to have Proof of Purchase available.  Service:  TO OBTAIN PRODUCT INFORMATION,  CALL 1-800-BE-SHARP  OR VISIT www.sharpusa.com  sH,a r R SHARP Sharp  ELECTRONICS Plaza,  Mahwah,  SHARP Q-  54  CORPORATION  New Jersey  07430-2135  CORPORATION  ¢------------SHAR|  VALID  IN CANADA  ONLY  LiMiTED WARRANTY Consumer E/ectron/cs Products  Congratulations Sharp  Electronics  Sharp  brand  Sharp  warrants  defects  product,  Ltd. (hereinafter  when  that  should  specified This  of Canada  shipped  this  product  be found  in this  is free,  "Sharp")  container  under  normal  within  the  on your purchase!  gives  the  and sold  use  following  and maintenance,  applicable  express  or distributed  warranty  from  period,  warranty  in Canada any  Sharp  defects  shaB,  to the first consumer  by Sharp  in material  at its  purchaser  or by an Authorized and  option,  workmanship,  repair  for this  Sharp  Dealer:  if any  or replace  the  such  product  as  herein.  warranty  shall  net  apply  to:  Any defects caused or repairs use as outlined in the owner's  (b)  Any  Sharp  product  or Sharp's Damage head (d)  in its original  product  (a)  (c)  called  Any  tampered  Authorized caused  cleaning  with,  Servicing  or repairs tapes  replacement  not fimited  required manual.  modified,  of abusive  adjusted  operation,  or repaired  negligence,  by any party  accident,  other  than  improper  installation  or inappropriate  Sharp's  Authorized  Service  by Sharp,  including  Sharp,  Centres  Dealers.  required  as a result  and chemical  cleaning  of accessories,  to earphones,  as a result  glassware,  remote  controls,  of the  use with  items  not  specified  or approved  but  not  limited  to  agents. consumable AC  or peripheral  adapters,  batteries,  items  required  temperature  through  probe,  normal  stylus,  use of the  trays,  filters,  product  belts,  including  but  caMes  and  ribbons,  paper. (e)  Any  cosmetic  (f)  Any  damage  damage caused  to the  surface  by external  or exterior  that  or environmental  has been  conditions,  defaced  or caused  including  but  by normal  not fimited  wear  and tear.  to transmission  fine/power  fine voffage  or fiquid  spiBage. (g)  Any  product  received  (h)  Any  products  used  (i)  Any  installation,  Should  this  together Authorized screen This  fail to operate  Servicing  constitutes  to extend,  fiability  for direct  defect  in material  the  The  manner  and  with  respect  to the purchaser fiability  purchaser  copy  mn home  damages  the of  warranty  service  wiB be responsible  product, for  described  to the product  and shah  may  be  by Sharp  on behalf  or for any  to the  warranty  markings.  incidental  any removal, constitute  be obtained to  an  at Sharp's  upon  delivery  Authorized  discretion  of the  Sharp  on  any  Sharp  Service  Sharp  product  Centre  television  or an with  the  Oven. and  special damages  no other To  for the  complete  full satisfaction  the  dealer, extent  service the  or consequentiN  reinstaHation,  constitute  may  statement  provided  of Sharp.  including  herein,  service  WARRANTY Microwave  granted  warranty  or losses  of time  end CSA/cUL  period,  LIMITED  warranty this  relating  period  warranty this  Over-the-Range  express  or transfer  or workmanship  defects,  in the  entire  number  charges.  and on any Sharp  eNarge  of information.  a  serial  purposes.  during  and  Dealer.  or indirect  model  programming  of purchase  of 27" or larger  warranty  appropriate or commercial  and/or  product  proof  Sharp  size  authorized  setup  Sharp  with  without for rentN  damages  loss of time  transportation fuffiHment  centre  or their  law permits,  of this  and insurance whether  or employee  disclaims  or moss of profits  or use  Sharp  costs  of all obligations  of aft claims,  agent  Sharp  and  based  any  resulting  product  incurred.  all  from  a  or the  loss  Correction  of  responsibilities  on contract,  is  and  of Sharp  negligence,  strict  or otherwise.  WARRANTY  PERIODS:  Parts Audio  Products  Camcorder  1 year  DVD  1 year  Products  Projector  1 year  LCD & Plasma  & Labour  (exceptions  Display  TV  (lamp  90 days)  1 year  Microwave  Oven  1 year  (magnetren  Television  Products  1 year  (picture  VCR  Products  Vacuum  noted)  1 year  Cleaner  tube  component-4  additional  component-1  years)  additional  year)  1 year 1 year  n  i To obtain the name and address of rbc nearest Authorized Sharp Service Centre or Dealer, please contact: SHARP ELECTRONICS OF CANADA LTD 335 Britannia Road East, Mississauga, Ontario L4Z t W9  For more information on this Warranty, Sharp Extended Warranty Offers, Sharp Canada Products, Accessory Sales, Dealer or Service Locations, please call (905) 568-7140  .,  SHARP  Visit our Web site: www=sharp=ca  _  -C SERVICE  %  Revision 04/22/03  Q-  55  NOTE  Dimensional drawings Unit: Inch/(mm)  LC-32D62U 31 2s/64 (797)  ,  I 27 5/8 (701.4)  I I  ©  I,  o  19 31/32(507)  3 W32 (88)  7 7/8 (200)  3 53/64  10 s/4 (273)  LC-37D62U 36 :_/16(919)  .....  i  I 32 25/64(822.6)  _o  I. 2117j64/5oo/ .1 I  _, ........  ,, 4 :_7/64 (116)  cqv  3 53/64 .....  7 7/8 (200)  L 11 1/2 (292)  (97)  SHARP SHARP  ELECTRONICS  CORPORATION  Sharp Plaza, Mahwah, New Jersey 07430-2135  SHARP CORPORATION  Printed in Mexico Imprime au Mexique Impreso en Mexico TINS-C976WJZZ 07P02-MX-NM

Source Exif Data: 

File Type                       : PDF File Type Extension             : pdf MIME Type                       : application/pdf PDF Version                     : 1.2 Linearized                      : No Page Count                      : 59 Page Layout                     : SinglePage Page Mode                       : UseNone Producer                        : Goby Monitor Application version 3, 2, 1, 4 Create Date                     : Fri Jun 29 05:02:14 2007 Author                          :  Title                           :  Subject                         :

EXIF Metadata provided by EXIF.tools